All posts filed under: 40k

Second Sculpted Obliterator - The Build Up - The Robe is Added - front

Second Sculpted Obliterator (1) – The Build Up

Published by Joe B

As promised, here is some build up shots of my second obliterator. One of the things I wanted to change on the second guy was adding more bulk to the body. I wanted it to look closer to a full terminator suit rather than a scarecrow with a robe. I started with bending a couple paper clips to create the wire-frame with proportions of a terminator, including the width and hight of the square body section. I added the arm bits and the head. The coper wire was used to hold different paper clips sections together. I then started to bulk up the wire with blobs of green stuff. I added in some bitz around the head from an extra terminator front (from the lord box I think). I also added some exhaust pipes to the back using some plastic tubes. The daemon claw hand was cut and bent to close it up a bit, gs was added to fill the gaps. After letting the first layer of green stuff dry more was added to the legs …

Sculpted Obliterator Final - front

My First Sculpt Pt 5: An Obliterator – Finished!

Published by Joe B

With some nice time off from work I was able to finish the Obliterator that I had sculpted. Paint wise there wasn’t much left to do, just some touch-ups and finish the base. The skull mast came from the defiler kit, the chain arm from the sentinels, and the shoulder plates from the marauders. I spent a lot of time trying to blend the organic, blue tissue into the metal by high lighting the flesh with silver tones and washing the metal with blue. I had also started the second obliterator a few days ago while waiting for some paint to dry. For Christmas my wonderful wife got me a package of Procreate Putty which I have to say is a fantastic alternative to green-stuff. The procreate is not nearly as sticky as green stuff is but adheres very well to the model. It is also stiffer than gs which made creating the robe much easier as I didn’t have to ‘paint’ super glue onto the end of the tatters to keep them in place. Here is …

WIP Sculpted Obliterator - part 4

My First Sculpt Pt 4: An Obliterator – Long Over Due Post

Published by Joe B

So it has been a while since I picked up the brush… well continuing on then. Did some more details on my Obilterator which brings him to a nearly finished state. I still need to finish the base and perhaps something more on the robe, but not yet sure what. I had thought about adding the XIV to the shoulder plate but remembered that oblits don’t have an allegiance and just fight for who ever pays them the best. Instead I opted for the yellow chevrons on the chain blade to tie in with the rest of my army. I was struggling with separating the sash and robe since they are supposed to both be red. I have tried using different temperatures of red along with the yellow border to separate them. The sash was highlighted and shaded with cooler shades of red, the highlight was almost more blue than red actually. The robe used warmer shades of red to highlight and shade. I’m not sure if I like how it turned out, but perhaps it is just that the robe doesn’t …

WIP Obliterator Sculpt 9 - Blue Painted

My First Sculpt Pt 3: An Obliterator – Base Coat Done

Published by Joe B

Spent some time painting the Obliterator. After priming it black, it is amazing how all the details (and mistakes) pop out. I then did the base coat of all the colors to block it out. Mechrite Red for the robes, Mithril Silver to the steel, Dwarven Bronze for the piping, and Ice Blue for the metallic flesh. The whole model was then washed with Devlan Mud.  The blue ended up looking nasty, dirty bubble gum, but thats ok since I will be repainting it anyway. Which I did next. I wanted to try a blue, lava-like texture that blends into the metal. Not sure of the result, it looks too shiny. Any ideas for fixing it? Next up is the red robe, which will the much more difficult piece to paint as I am hoping to do some freehand trim.

WIP Sculpted Obliterator - 4

My First Sculpt Pt 2: An Obliterator – sculpt nearly finished

Published by Joe B

Got some more work done on my Obliterator sculpt. I filled in more of the front foot by adding pistons to each of the toes. I also added the upper robe and shoulder blades from the Fantasy Chaos Knights box. The ball on the end of the gun will shortly become an eye ball. Also need to add the wiring from the arms to the back. I also photoshop’d the image to get an (rough) idea of what the coloring will look like. I’m not sure how I’m going to paint the flesh-metal but it will probably be a dark gray or purple, any ideas would be appreciated 😉

My First Scupt: An Obliterator – WIP – and why I had Green Stuff

Published by Joe B

So I’ve developed this habit: when I try something new, I go all out and skip to the hard stuff. See my Mentor Legion post when I wanted to try painting white armor. See my WIP (kinda dead-in-progress right now) Scratch built Titan. Well the newest thing I decided to ‘try out’ is sculpting. I’ve done some green stuff work to fill gaps and create some honor badges for my Iron Warrior Chosen, but I haven’t done any true sculpting.Well after scouring FTW, The Painting Corp, and Massive Voodoo for how to sculpt and digging through the Chaos Codex (all three editions), Horus Heresy: Collected Visions, and Iron Warrior for ideas I grabbed my tools and got to work. Below are some very rough WIP shots of the first Obliterator (eventually I will do three). Obviously, there is still plenty of work to do on the upper half, but eventually the robe will continue on his upper half, including a draping hood. The left arm (the one with the chain blade) is not attached so …

Iron Warriors Rhino #2 - Done - Front

Iron Warriors Rhino 2 Done

Published by Joe B

Finished the third and final (for now) Rhino for my Iron Warriors army (see the first and second here). This one I tried a few new things. The first is the scratched metal. I tried using an old, terrible brush and splayed the bristles to create parallel streaks. I don’t think they all work out well, but it is something to build off of. The second is the free-hand Chaos star on the top hatch. I took the design from one I found in the 4th edition Codex showing the dual rings and 3d shape. I don’t think I pulled it off how I wanted, but for a first attempt, I’m happy with it. For this tank, I decided to put the stripes on the outer faces of the smoke stacks. Keeping it simple was needed to retain the tank from becoming too busy with the start, chain and skulls and havoc launcher. And here is all three in their finished states (click for a bigger picture!). I have a couple of random projects I …

Iron Warriors Rhino 4 - Right Side

Iron Warriors Rhino #4 Done

Published by Joe B

This is my fourth Iron Warriors Rhino finished. Complete with plenty of chevrons and looking fittingly dirty. Finished up the details on Rhino #4 which mostly entailed the stripes and spotlight. After the last Rhino’s attempt at doing the strips freehand I decided to cheat a bit on this one and mask the black areas off with scotch tape. I started by taping all the area around where I wanted black so I could spray it. I then took some clear masking fluid and sponged it into the area. This way I could take an eraser to it and uncover the metal area underneath. I then sprayed it black, waited for it to dry and then covered it with scotch tape. After marking out each strip, I cut it apart with the handy knife and removed the tape where I wanted the yellow. After painting up the yellow, I removed the tape and washed the whole thing with a sepia wash. Once that was dry, I rubbed off the clear masking fluid to finish the worn effect. Overall I’m …

Iron Warriors Rhino #1 - back

Iron Warriors Rhino #3 Finished

Published by Joe B

Decided to finish each of the Rhinos one at a time, so here is the first. I credit Wienas for the idea o f hazard strips on the front panel, so thanks for that! I think they turned out ok. I made the mistake of deciding to paint the interior and although it turned out ok, the amount of work that went into something that may never been seen any way… not so sure.

Iron Warrior Terminator Squad 4

Iron Warriors Terminator Squad 4 Complete

Published by Joe B

So as I continue to balance between completing old units and finishing new ones (see the Mentor Legion guys I just finished) I have put the finishing touches on my 4th Iron Warriors Terminator squad (WIP shots here). There wasn’t much left to finish on this squad. I finished the base using my new style and painted on the XIV to mark them as part of the 14th Grand Company. Standard bolter and power ax with the obligatory Space Marine helmet. Heavy flamer and power fist with the cool helmet from the Sorcerer Lord kit. Chainfist time and a trophy rack with my Brother-in-law’s Hive Fleet Behemoth head on display. Combi-flamer and another power ax. This is by far the coolest chainfist, fitting I also give him the combi-meltagun.One more squad off the painting table and marked green in the status page! Next up is the rhinos…

Mentor Legion Squad Finished

Mentor Legion Tactical Squad Finished – Part 6

Published by Joe B

Back to my Mentor Legion Tactical Squad that I’m working on as a test pilot program for some loyalists. I was finally able to finish the last few details of the squad, including the base and matte varnish. I’m still playing around with some various backgrounds and picked up a pack of card stock of a couple shades of tan and gray. For this shot I used the dark gray card as the tans turned out too yellow and light. The only thing I don’t like about using the card stock is the lines, oh well. On to the individual shots: The Captain pointing away with his yellow power sword and Mk. VII Armor.   The sensor guy with his grenade. I like how the numeral 3 came out on his shoulder pad.   Standard bolter marine but with an added scope.   Meltagun, note the extra targeting lenses, I always have issues hitting with meltaguns, so I figured it could only help right?   And the missile launcher. I added a bit of script to the tube …

Mentor Legion Squad WIP – Part 5

Published by Joe B

Well I wasn’t able to finish the squad over the weekend, but I made some good progress. Until now I had been debating on how the Mentor Legion would show company/squad markings. They are a codex chapter but having different colored shoulder bands wouldn’t fit their look. I couldn’t find any thing scouring the interwebs so I decided on knee pads for the company color and Gothic numbering for the squad. This squad has been placed in the 2nd Company, 3rd Tactical Squad. This guy was my first attempt at free handing the tactical arrow and it turned out terrible! So I opted for the half-cheating approach. I used the transfers from the kit for the inner white arrow and repainted the red edging and then repainted the white inner area. I used the transfers on the other tactical arrows as well with an over-paint to cover the decal. I tried using the same technique for the Gothic number 3 but the decal was way too big for the curved surface and kept bulging. After trying to …